AS568-209 FFKM O-Ring — 17.04 × 3.53 mm
A robust, high-squeeze section for demanding static and reciprocating seals in larger equipment. With an inside diameter of 17.04 mm and a 3.53 mm cross section, this is a small-bore seal for compact assemblies and small-bore equipment. Moulded from Aperflu 2275 perfluoroelastomer (FFKM) for continuous service up to 200 °C, this seal resists hot acids, caustics, solvents, fuels and steam.
Dimensions
| Dash number | AS568-209 |
|---|---|
| Inside diameter (ID) | 17.04 mm (0.671 in) |
| Cross section (CS) | 3.53 mm (0.139 in) |
| Outside diameter (OD) | 24.1 mm (0.949 in) |
| Material | Aperflu 2275 perfluoroelastomer (FFKM) |
| Service temperature | up to 200 °C continuous |
Pharmaceutical and food processing
Steam-in-place and clean-in-place cycles, aggressive cleaning agents and potent active pharmaceutical ingredients (APIs) demand a seal that stays inert and dimensionally stable. Aperflu 2275 is suited to product-contact and CIP/SIP duties where extractables must be kept to a minimum.
Why Aperflu 2275 FFKM
Perfluoroelastomer (FFKM) is the most chemically and thermally resistant elastomer class available — rated for continuous use beyond 200 °C and stable against well over 1,600 chemicals, which is why it is specified where FKM, silicone and EPDM fail.
Typical applications
Hydraulic cylinders, chemical process valves, wellhead and downhole tooling, where Aperflu 2275 outperforms FKM and EPDM in aggressive media and elevated temperature.
Compound properties
| Property | Typical value | Test method |
|---|---|---|
| Hardness | 70 – 71 Shore A | GB/T 39693.4 |
| Tensile strength | 21.2 – 21.8 MPa | GB/T 528 (dumbbell type 2) |
| Elongation at break | 155 – 170 % | GB/T 528 (dumbbell type 2) |
| Compression set, 200 °C × 70 h (25 %, method B) | 15 – 16 % | GB/T 7759.1 |
All values are typical. Every batch is shipped with an individual certificate of analysis and may differ from the typical values listed here.
Chemical resistance
| Media group | Rating |
|---|---|
| Hot organic & inorganic acids | Excellent |
| Caustics (NaOH up to 50 %) | Excellent |
| Ketones, aldehydes, esters, ethers, alcohols | Excellent |
| Solvents, fuels, hydrocarbons, sour gases | Excellent |
| Steam and hot water | Excellent |
| Amines (high temperature, concentrated) | Good – contact us for grade selection |
| Clean-in-place (CIP) / steam-in-place (SIP) agents | Excellent |
| Active pharmaceutical ingredients (APIs) | Excellent |
Need AS568-209 in a custom colour or quantity?
Tell us your dash number, quantity and service media. We quote within 24 hours.
Request a Quote